SATA SSD VS NVME M.2 SSD

SSD’s are a great improvement over the traditional HDD. There are many things which you can improve while upgrading to an SSD. For beginners, HDD stands for Hard Disk Drive or Hard Disk whereas SSD stands for Solid State Drive. The Key difference in both of these storages is that HDD has mechanical parts whereas SSD works with Flash storages same as Pend drives or SD Cards. If you Plan to upgrade from HDD to SSD then you can clearly see there are two types of SSD. One Is SATA (Serial Advanced Technology Attachment) and another one is NVME M.2 SSD. Both of them are great for an upgrade over HDD. But need to Figure out about SATA NVME Upgrade is that, whether you should go with SATA or NMVE.

Upgrade from HDD to SSD (Improvements)

As mentioned above there are a lot of things which you can improve in your system after upgrading to SSD. Some most significant improvements are listed as:

  • Faster Boot Time
  • Fast Sequential access to Files
  • Improved Random Access of Files
  • Clearly improves performance in heavy Applications such as Photoshop etc.

There are many aspects where SSD outshine HDD in terms of performance. But it is also true that SSD and HDD (7200 rpm) both perform same will access the single large file.

SATA SSD and NVME SSD Performances

As we mentioned both perform better than traditional HDD’s. But if you plan to upgrade to an SSD you might feel confused over here. As both of them provide great performance having a slight difference in prices.

Who is Best SATA SSD or NVME SSD

To understand this, we need to take a look at their working types. SATA SSD’s are connected to the motherboard via a SATA cable that can support up to GIB/sec of transfer rates. Whereas NVME M.2 SSD’s are plugged directly into the motherboard via PCIe (Peripheral Component Interconnect Express). PCIe slots provide low latency to data with high transfer rates.

To compare the performances benchmarks shows that NVME M.2 SSD’s outshine SATA SSD’s. NVME gives higher sequential read and writes speeds. This means files can be accessed from the storage at a faster rate as compared to SATA ones.

SATA SSD and NVME M.2 SSD Upgrade
ADATA NVME M.2 PCIe X4 Results

You can clearly see the sequential Read speed (1.82 GB/sec), that’s really a huge read speed. This is how NVME M.2 SSD performs while inside your System.

How to Upgrade from HDD to SSD

You should clearly upgrade to an NVME M.2 SSD instead of SATA SSD. This is due to the fact that NVME M.2 provides better performance over SATA SSD. We agree that NVME M.2 SSD is slightly higher in price to size ratio, but believe me, you will get stunning performance. Rest it is your final decision about what you choose for your system.

Procedure to Upgrade From HDD to SSD

Upgrading from HDD to SATA SSD:-

Upgrading HDD to SATA SSD is the most simple procedure. All you need to do is that just choose a SATA SSD which suits you. To choose a perfect SATA SSD you need to keep your demands in minds like size and budget.

  1. Choose the best SATA SSD for your system.
  2. Plug the SATA Power and SATA cable to your SSD and system. As you do in case of HDD.
  3. Check Into BIOS (Basic Input Output System) that your SSD is detected.

That’s all folks for SATA SSD. Next what you need to do is either install fresh new windows or copy your data to your new SSD. Full Guide.

Upgrading from HDD to NVME SSD:-

NVME SSD upgrade is also an easy folk. All need to do is that choose the best M.2 SSD for your system. Here best match will be the matching of PCIe slot with the SSD you chose.

In M.2 SSD you will see two types of SSD’s one is Single cut and another one is Double cut. In General, NVME compatible PCIe slots are single cut and all others are Double cut.

After choosing the correct SSD you are ready to go.

  1. Plug the M.2 NVME SSD into PCIe slot correctly.
  2. Screw down your SSD to get it fixed properly.
  3. Check Into BIOS (Basic Input Output System) that your SSD is detected.

That’s all folks for NVME M.2 SSD. Next what you need to do is either install fresh new windows or copy your data to your new SSD. Full Guide.

Copy Windows From HDD to New SSD

Plugging new SSD is the easiest task. you do not need any rocket science to do that, but you need to confirm that your SSD should get recognised by the system. Also, you can install new Windows on the SSD but in case you want that your HDD Windows gets copied as it is on the SSD, you need to do it carefully having plenty of time. This copying of Windows surely going to take a long time. So don’t forget to have a cup of coffee.

To do this task there are many tools available in the market which you use to copy your Windows from HDD to new SATA or NVME SSD. We will list one tool that you can use. Tools name is EaseUS ToDo. This tool will help to do your work in an easy way. So, you need not worry.

Steps to Copy Windows Using EaseUS ToDo

Before doing anything we advise you to have your data backed up so that in case of any error you can retrieve your data.

  1. Launch the Application
  2. Click on “Clone”
  3. Select all the partition related to Windows or C Drive. These include C Drive, System Reserved and Recovery one.
  4. Next Select the target drive i.e. your SATA or NVME SSD Storage partition. Also Select Optimize for SSD option.
  5. Edit your partition for SSD by dragging the blocks Left and Right.
  6. As you have selected three partitions so choose according to their sizes.
  7. Hit Done and follow the normal instructions.
  8. After the process is finished you will see a Drive created in This PC.

After completion now its time to give your work a finishing touch. Before final touches. Head to BIOS and point your Boot Drive to New Drive created just now.

Make sure TRIM is turned on. (To read more about Trim you can consider this. TRIM). Now continue with the following commands in CMD.

fsutil behavior query DisableDeleteNotify

This Command will produce either 1 or 0 depending on the TRIM condition. 0 means TRIM is running. 1 means TRIM is not running. If you need to enable it to type the following command:

fsutil behavior set DisableNotify 0

Now, Restore your data from the backup. And all Done!

This all folks from Benefits of upgrading from HDD to SSD. Which SSD is best SATA SSD or NVME M.2 SSD? If you planned to upgrade then how you can copy your Windows from HDD to SSD.

For more awesome Tech Content Like us on Facebook, Follow us on TwitterInstagram, Pinterest and Subscribe to Our YouTube Channel.